|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
JET JW1317 4" Wire Hose Clamp (5-pack) from JET Price: $4.45 Customer Review:  I've tried the band type of clamp and they simply do not hold over the long haul. The wire clamps allow you to tighten the clamp down for a firm grip in the fixture. My opinion, the wire clamps are the best thing since sliced bread for hooking up a duct collection system. |
Customer Rating: |
|
|
|||
| 2. |
|
JET JW1142 4" Aluminum Blastgate from JET Price: $12.99 Customer Review: I have now traded all my plastic blastgates for aluminum. They cost a bit more, but are worth it. They don't clog as easily,and if they do, are easier to clean. The setscrew helps to keep it open or closed. Don't waste your money on plastic blastgates. |
Customer Rating: |
|
|
|||
| 3. |
|
JET JW1038 4" Quick Disconnect from JET Price: $7.99 |
|
|
|
|||
| 4. |
|
Fein DW1XXX Wet/Dry Clean-Up Kit from Fein Price: $69.99 Customer Review: I have owned my Turbo II vacuum for a number of years now, and I will admit that I was never willing to spend the money for these attachments. It is true that there are many lesser vacuums out there that include the tools, but I always told myself that I would rather have an awesome shop vac and no... |
Customer Rating: |
|
|
|||
| 5. |
|
Woodstock International W1317 4" Wire Hose Clamp from Woodstock Customer Review: These wire ones are much easier to use than other kinds available. Buy these and you will be happy. |
Customer Rating: |
|
|
|||
| 6. |
|
JET JW1044 4" to 2-1/2" Adapter from JET Price: $5.49 Customer Review:  If you need to step down in the DC system, which is recommended, this works great. The ends are to size stated, the hose fit easily and the wire clamps put it all together snuggly. The fitting allows you to step down from a larger main line to smaller branch lines near the machine, thus increasing... |
Customer Rating: |
|
|
|||
| 7. |
|
Woodstock International W1142 4" Aluminum Blast Gate from Woodstock Customer Review: The photo looks exactly like the Jet model with a large, easy to turn plasstic knob but this Woodstock International model blast gate has only a tiny little metal thumb screw instead. The price difference is worth it in my opinion, but be warned. |
Customer Rating: |
|
|
|||
| 8. |
|
JET JW1003 Floor Sweep from JET Price: $12.99 Customer Review: I agree with the previous reviewer that this is an excellent "tool" to clean up all of the dust and scraps that have would up on the floor. The unit it self is sturdy and should stand up to lots of use. But that is not all it can do. I found one very cool use for the floor sweep. Since I don't... |
Customer Rating: |
|
|
|||
| 9. |
|
JET JW1055 Dust Collection Kit #2 from JET Price: $59.99 Customer Review: A nice, easy to order kit of the needed items for a DC system. The kit includes 2 blast gates, one "Y" connector, 10 wire clamps, 2 ten foot sections of hose, a table saw hood and another dust hood, all for a 4" system. You save a few bucks by ordering the kit versus each item separately. All... |
Customer Rating: |
|
|
|||
| 10. |
|
JET JW1049 Dust Collection Separator from JET Price: $29.99 Customer Review: If you are doing any dust collection, particularly from stationary machines, you've got to get one of these. It lets the large chips from planers, jointers, lathes, table saws and floor sweeps drop into a 30 gallon galvanized trash can (that you supply). This is so much easier than endlessly dumping... |
Customer Rating: |
|
|
|||
| 11. |
|
Delta 50-444 Dust Collection Intake from Delta Price: $16.99 Customer Review: If the machine does not have a DC port, then this is the thing you want. It's about 5" x 9" with a 4" hose connection, best of all, it has bolt holes so it can be connected to your work bench or a mount. I have two collection intakes in use, one on the lathe and the other by the drill press. I... |
Customer Rating: |
|
|
|||
| 12. |
|
Biesemeyer 78-966 Dust Collection Kit for T-Square Blade Guard from Biesemeyer Price: $99.99 Customer Review:  ...P>What you get is four small bolts and nuts that you do not need (they are the same size as the ones already in the guard), a hose that should be clear but is not, a new entrance flapper and a new top insert with a molded on elbow where the hose attaches. According to the instruction sheet there... |
Customer Rating: |
|
|
|||
| 13. |
|
Woodstock International G8830 4-1/4" Hose Hangers from Woodstock International Customer Review: If you make messes big enough to need a 4 1/4 inch hose for cleanup, you probably learned your trade in the Army. These clamps will keep your cleaning gear neatly bolted to the wall or ceiling, as needed. |
Customer Rating: |
|
|
|||
| 14. |
|
JET JW1041 3" - 2-1/2" Reducer from JET Price: $4.99 Customer Review: This fitting is well made, just like the rest of the Jet dust collection fittings. I am using this on a Delta Sanding station. The output port size of the sander is 3 inches. This fits in snugly. My dust collection hose is a standard flexible 2 1/2", and that falls inside this reducer snugly as... |
Customer Rating: |
|
|
|||
| 15. |
|
JET JW1039 Multiple Step Adapter from JET Price: $7.99 |
|
|
|
|||
| 16. |
|
JET JW1015 4" Y Connector from JET Price: $7.99 Customer Review: When installing a dust collection system, eliminating resistance to airflow is what it is all about. The ideal is as large a pipe as possible, flowing in a straight line, without any ridges in the surface. Of course in the real world at least some of these things wind up being less than ideal. What... |
Customer Rating: |
|
|
|||
| 17. |
|
Dirt Devil M193 7-Piece Attachment Kit for Original Dirt Devil Hand Vacs from Dirt Devil Price: $12.99 |
|
|
|
|||
| 18. |
|
JET JW1007 4" Blastgate from JET Price: $7.99 Customer Review:  I bought these plastic blastgates because they were cheaper than aluminum. What a waste of money! I broke two of them while installing, the slots jam up with chips, and they cannot be taken apart for cleaning. As my funds allow, I will be replacing the plastic with aluminum. |
Customer Rating: |
|
|
|||
| 19. |
|
Fein DW3XXX Wet/Dry Kit for 9-77-25 Vacuum from Fein Price: $59.99 Customer Review: They should really be included with the vacuum but I am happy with quality. The tools are better than what you normally get for free with a shop vac. The floor tool is especially nice. |
Customer Rating: |
|
|
|||
| 20. |
|
JET JW1053 Grounding Kits from JET Price: $12.99 Customer Review:  What's the point. I can get spare wire and wire nuts to ground my system far cheaper than this. i find the braided copper hard to deal with and am far happier using spare romex I have lying around the shop. Do yourself a favor and make one of these yourself. |
Customer Rating: |
|
|
|||
| 21. |
|
EcoGate EG204B Electronically Controlled 4" Blast Gate with Sensor and Cable from Ecogate Price: $89.99 |
|
|
|
|||
| 22. |
|
Fein 921072K13 Step Adaptor from Fein Price: $4.19 |
|
|
|
|||
| 23. |
|
Woodstock International G3376 30 Gallon Dust Collection 2 Stage Cyclone Separator from Woodstock International |
|
|
|
|||
| 24. |
|
Woodstock International G1843 4" Plastic Blast Gate from Woodstock International |
|
|
|
|||
| 25. |
|
Shop-Vac 801-89-33 Micro Cleaning Kit from Shop-Vac Price: $14.69 Customer Review: To use this you need Shop-Vac 906-85-00 2.5" to 1.25" Conversion Unit. Imagine the suction of your Shop-Vac pulling through the tip the size of a pencil! That gives you an idea of the cleaning ability you can get with this add on kit. We had broken glass from a shattered windshield of our van - in... |
Customer Rating: |
|
|
|
1 - 25 |
|
| PortionsAmazon.com, Inc. |