|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
HTC HTC2000 Universal Mobile Base from HTC Price: $43.00 Customer Review:  If a tool is to be judged on it's utility then this is a winner. What makes this base so great is that it does what it's supposed to do, does it well, and sells for around fifty bucks. My shop is so small Hennie Youngman could do a whole routine around it. I don't have the luxury of thousands of... |
Customer Rating: |
|
|
|||
| 2. |
|
Powermatic 2042335 Mobile Base from Powermatic Price: $199.99 Customer Review: (...) The correct POWERMATIC picture of this base is at the Powermatic Site. Here is the link to the actual manual for those that want the detail: http://www.powermatic.com/PMWood/Manuals/CurrentManuals/Powermaticmobilebase.pdf This was built for the Powermatic 66 and says Powermatic on the... |
Customer Rating: |
|
|
|||
| 3. |
|
HTC HTC1000 Universal Mobile Base from HTC Price: $33.00 Customer Review: I recently purchased this mobile base and I must say that for the price it can't be beat. The base is well built, easy to put together and performs as advertised. I was ready to buy craftsmans version ...untill I found this one. From what I've seen they appear to be the same except for the price. I... |
Customer Rating: |
|
|
|||
| 4. |
|
Delta 50-277 Mobile Machine Base for 10" Contractor's Saw, 13" and 15" Planers, Straight Leg Stand from Delta Price: $89.99 Customer Review: Beautifully designed, simple to set up, this mobile base is strong and maneuvers nicely. Had I known how great this is and the mobility it provides, I would have ordered it years ago. Took less than 5 minutes to assemble, (one bolt) then was able to tilt my HEAVY saw (without assistance) to place... |
Customer Rating: |
|
|
|||
| 5. |
|
Delta 50-345 Universal Mobile Base Kit (Wood Not Included) from Delta Price: $49.99 Customer Review: This mobile base is easy to assemble as long as you accurately mark and drill the holes for the bolts that attach the corner pieces to the wooden frame. Assuming you have the 1.5 inch stock needed to make the side rails on hand, you can put the whole thing together in less than an hour. And when... |
Customer Rating: |
|
|
|||
| 6. |
|
HTC HRS-10G Mobile Base (For Delta Unisaw with 52" Unifence and Jet JTAS Saw with 50" Xacta Fence) from HTC Price: $189.99 Customer Review:  I read all the reviews at Amazon.com on this item and still did not believe that the HTC mobile base could be as bad as some folks say it is. After receiving it, I can say that the reviews were right. Without leveling bolts, the base is useless and the wheel lock-downs are made of cheep materials.... |
Customer Rating: |
|
|
|||
| 7. |
|
HTC HRD-10X Mobile Base for Delta 10" Contractor Saw with 30" Unifence from HTC Price: $149.99 Customer Review: A must have for the Delta saw with the 30" fence. Particularly in a limited space. Out of the box setup, well built. 3 snaps up! |
Customer Rating: |
|
|
|||
| 8. |
|
HTC HSG-2064 Mobile Base Powermatic 64, 64-A, 63, & General 50-175/185 from HTC Price: $94.99 |
|
|
|
|||
| 9. |
|
Delta 50-284 Mobile Machine Base (For 52" Unifence) from Delta Price: $99.99 Customer Review: What's there to say. It fit perfectly and all 400+ pounds of saw rolls around easily. |
Customer Rating: |
|
|
|||
| 10. |
|
Delta 36-885 Platinum Unisaw Accessory Package from Delta Price: $299.99 Customer Review:  The Mobil Base works very well, however you need help in moving your saw if you purchased the Delta 36-960L. Someone has to support the out feed table. The dust chute works well. The dado set is ok, but you will need a set of shims to go with it.The only real problem is that if you purchased a left... |
Customer Rating: |
|
|
|||
| 11. |
|
Vega MMK-3 Machinery Mover with Tongue: 13"-28" Wide, 50"-71" Long from Vega Price: $149.99 |
|
|
|
|||
| 12. |
|
HTC HJTS-761G Mobile Base from HTC Price: $189.99 Customer Review: I bought the Jet JWTS-10CW2-PFX contractor table saw with the 52-inch fence and followed the link to this page and purchased the base also. The good news are that the base is easy to assemble, makes moving the table saw a breeze and even looks better than the picture above. The table saw sits on a... |
Customer Rating: |
|
|
|||
| 13. |
|
HTC HRS-10 Mobile Base for Delta Unisaw and Heavy Duty Shaper from HTC Price: $94.99 |
|
|
|
|||
| 14. |
|
HTC HRD-10 Mobile Base for Delta 10" Contractor Saw with Straight Legs from HTC Price: $99.99 |
|
|
|
|||
| 15. |
|
Delta 50-279 Mobile Base for XL-10 and 34-670 Table Saws (for Four Leg Stand Only) from Delta Price: $95.81 |
|
|
|
|||
| 16. |
|
Powermatic 2042336 Mobile Base from Powermatic Price: $99.99 Customer Review:  I bought one with my PM66, and I don't much care for the design and the price. Although it's well made, the three-wheel set-up is unstable, and the saw will tilt with a fairly light touch. The swiveling wheel does not have a swivel lock, so even when everything is locked down, the saw will still... |
Customer Rating: |
|
|
|||
| 17. |
|
HTC HJTS-761 Mobile Base (For Jet Model JWTS-10JF Table Saw) from HTC Price: $94.99 Customer Review: This mobile base went together in just five minutes. The steel and wheels are all of good quality material. Caution! When I was cutting a 24" X 48" X 5/8"piece of plywood, the tablesaw started to tip due to only one wheel at one end. This almost cost me severe injury to the face as the blade was... |
Customer Rating: |
|
|
|||
| 18. |
|
HTC HRC-10 Mobile Base for Delta 10" Contractor Saw with Curved Legs from HTC Price: $89.99 |
|
|
|
|||
| 19. |
|
HTC HJTS-761X Mobile Base (For Model JWTS-10PF) from HTC Price: $139.99 |
|
|
|
|||
| 20. |
|
DeWalt DW7460 Mobile Base from DeWalt Price: $94.99 Customer Review: If you have any intention of moving your DW 746 table saw (which weighs approximately 200 pounds and needs two people to move it, particularly when the fence and support tables are attached) around your work area, then this mobile base verges on mandatory. With it, I can move the table saw around... |
Customer Rating: |
|
|
|||
| 21. |
|
Delta 50-289 Mobile Machine Base for Unisaw with 52" Unifence from Delta Price: $159.99 Customer Review: MY 36-844 FITS LIKE A GLOVE TOOK LESS THAN 15 MINS. TO PUT TOGETHER. CALL A FRIEND YOU STILL HAVE TO LIFT YOUR SAW ON IT. YOU WONT REGRET THIS PURCHASE. USE SOME CAUTION WHEN LOWERING,500LBS.OR MORE IS STILL HEAVY. |
Customer Rating: |
|
|
|||
| 22. |
|
Delta 50-286 Mobile Machine Base for 31-280 Sanding Center from Delta Price: $89.99 |
|
|
|
|||
| 23. |
|
HTC HSG-2854 Mobile Base for Powermatic 1791228GK from HTC Price: $189.99 Customer Review:  I haven't actually used this mobile base yet. I got it with my new Powermatic 64 saw, which I also haven't used yet (need some time to set it up). But I put this base together already (a small job that I could handle with my time constraints). First of all, I'm disappointed that... |
Customer Rating: |
|
|
|||
| 24. |
|
Delta 50-277K Mobile Base with Extension (For 36-445 Delta Saw) from Delta Price: $144.99 |
|
|
|
|||
| 25. |
|
Delta 50-273 Mobile Machine Base for Unisaw and Heavy Duty Shaper from Delta Price: $89.99 Customer Review: The mobile base is a perfect fit for the saw. It is easy to use and so compact that it does not get in the way when I use the saw. |
Customer Rating: |
|
|
|
1 - 25 |
|
| PortionsAmazon.com, Inc. |