|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
HTC HTC2000 Universal Mobile Base from HTC Price: $43.00 Customer Review:  If a tool is to be judged on it's utility then this is a winner. What makes this base so great is that it does what it's supposed to do, does it well, and sells for around fifty bucks. My shop is so small Hennie Youngman could do a whole routine around it. I don't have the luxury of thousands of... |
Customer Rating: |
|
|
|||
| 2. |
|
HTC HTC1000 Universal Mobile Base from HTC Price: $33.00 Customer Review: I recently purchased this mobile base and I must say that for the price it can't be beat. The base is well built, easy to put together and performs as advertised. I was ready to buy craftsmans version ...untill I found this one. From what I've seen they appear to be the same except for the price. I... |
Customer Rating: |
|
|
|||
| 3. |
|
HTC HPJ-6 Mobile Base for 6" and 8" Jointer Current Model Powermatic Machines from HTC Price: $94.99 Customer Review:  One thing to add is be careful trying to tighten the carriage bolts that hold the front swivel in place. They are cheap, soft metal and I broke two of them trying to tighten them into the round holes they go in. Carriage bolts in round holes is a poor design. Front wheel/brake is kinda Mickey Mouse... |
Customer Rating: |
|
|
|||
| 4. |
|
Delta 50-345 Universal Mobile Base Kit (Wood Not Included) from Delta Price: $49.99 Customer Review: This mobile base is easy to assemble as long as you accurately mark and drill the holes for the bolts that attach the corner pieces to the wooden frame. Assuming you have the 1.5 inch stock needed to make the side rails on hand, you can put the whole thing together in less than an hour. And when... |
Customer Rating: |
|
|
|||
| 5. |
|
Delta 50-281 Mobile Base for 37-280 Jointer and 31-252 Drum Sander from Delta Price: $89.99 Customer Review: Be aware that the listed width in Amazon is wrong the true inside dimensions are 21" x 35-3/4". I built a router table to put on this mobile base using the stated wrong demensions in Amazon. I hope this info keeps you from the mistake I made. As for the base, I like them this is the third one I... |
Customer Rating: |
|
|
|||
| 6. |
|
Delta 50-276 Mobile Machine Base (For Model DJ-20 Joiner) from Delta Price: $89.99 Customer Review: I put all of my machines on mobile bases, and have had mixed luck with various manufacturers. By far my best experiences have been with the bases made for specific machines. They're a cinch to get together and start using. This one was no exception. Its very sturdy and with a good push you can jump... |
Customer Rating: |
|
|
|||
| 7. |
|
Delta 50-296 Mobile Base for 37-380 8" Jointer from Delta Price: $89.99 Customer Review: Unless you have a large shop where you will never need to move your jointer, you need this item, the rack and pinion on the fence takes a bit of room. I was a bit hesatant due to the price but I am glad I purchased it. The Jointer is now easy to relocate, a single step on the pedal and one hand is... |
Customer Rating: |
|
|
|||
| 8. |
|
HTC HSJ-678 Mobile Base for Jet Model JJ-6CS 6" Jointer from HTC Price: $94.99 Customer Review:  I prefer to spend more money on mobile bases that fit specific machines. No assembly hassles and 1 piece solid construction. If my wife let me have more time I'd just mig weld my own frames together, and use GOOD wheels. That's my only complaint. That front locking wheel is one of the cheapest... |
Customer Rating: |
|
|
|||
| 9. |
|
Delta 50-293 Mobile Base for 37-190 Jointer from Delta Price: $89.99 |
|
|
|
|||
| 10. |
|
Vega MMK-3 Machinery Mover with Tongue: 13"-28" Wide, 50"-71" Long from Vega Price: $149.99 |
|
|
|
|||
| 11. |
|
HTC HPJ-1980 Mobile Base from HTC Price: $94.99 |
|
|
|
|||
| 12. |
|
HTC HRJ-8 Mobile Base for Delta 8" Jointer DJ-20 from HTC Price: $94.99 |
|
|
|
|||
| 13. |
|
Delta 50-333 Mobile Base for 37-195 6" Jointer from Delta Price: $89.99 Customer Review: Just the best device to move your equipment. With out them I could not have the machines because there would not be enough room in my basement shop and I do not wish to heat another space. They are over priced for what they are but to some of us a necessity. Good quality and function. |
Customer Rating: |
|
|
|||
| 14. |
|
Vega MMB-1 Machinery Mover without Tongue: 13"-28" Wide, 17"-29" Long from Vega Price: $89.99 Customer Review: This is the one! I looked at them all. I have owned many other different mobil bases. This is the only one on the market that I will use or recomend. A simple solution to a heavy problem. Wheels are in close, no bending over, sits flat, minimal space, works great. Other manufactures should look here... |
Customer Rating: |
|
|
|||
| 15. |
|
Vega MMK-2 Machinery Mover with Tongue: 13"-28" Wide, 29"-50" Long from Vega Price: $139.99 Customer Review: I bought one of these fantastic equipment bases yesterday for my router table. My table is build entirely of oak and without a router weighs between 200 and 300 pounds. Despite the fact that I am a paraplegic and cannot get on the floor to do complex assemblies or lift heavy weights unassisted, I... |
Customer Rating: |
|
|
|||
| 16. |
|
Vega MMB-3 Machinery Mover without Tongue: 13"-28" Wide, 50"-71" Long from Vega Price: $139.99 |
|
|
|
|||
| 17. |
|
Vega MMB-2 Machinery Mover without Tongue: 13"-28" Wide, 29"-50" Long from Vega Price: $129.99 Customer Review:  I just installed this on a 660lb. engine lathe and while the design of the stand itself is very stout, the handle and tongue needed to move the machine is not up to the 800lb. rating, the first time I tried to use it I am already seeing some bending of the axel on the tongue unit (the stand itself... |
Customer Rating: |
|
|
|
1 - 17 |
| PortionsAmazon.com, Inc. |