|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
Bench Dog Feather-Loc 10-005 Featherboard for Tablesaws from Bench Dog Price: $24.99 Customer Review:  I recently had to borrow a feather board from a friend. I had broken a home made one. So I did and found it be totally versatile easy to use and take off. It also felt very comfortable in many different positions. Changing angles quickly and it also was very accurate, no hangups. The material also... |
Customer Rating: |
|
|
|||
| 2. |
|
Blade Loc LOC100 Blade-Loc with Featherboard Kit from Bench Dog Price: $34.99 Customer Review:  You can buy these individually on Amazon for $28.00 and change. |
Customer Rating: |
|
|
|||
| 3. |
|
Mesa Vista Design Grip-Tite Magnetic Featherboard from Mesa Vista Design Price: $32.99 Customer Review: The product being shipped now differs from the illustration above; the base is heavy plastic instead of wood. There are also two small "wings" that screw in the notches on the side to hold side pressure. This holds on two axis when the "L" piece shown is installed. It sticks firmly to any iron... |
Customer Rating: |
|
|
|||
| 4. |
|
Big Horn 10221B Push Stick from Big Horn Price: $4.99 Customer Review: This push stick is especially useful when running narrow stock through your table saw or jointer. I prefer the larger pad type push blocks for most applications, but they just don't work on narrow pieces. The plastic cuts easily without damaging your blade or knives, just in case you goof. For that... |
Customer Rating: |
|
|
|||
| 5. |
|
Big Horn 19072B Push Block from Big Horn Price: $4.99 Customer Review: These are pretty nice to have around the shop. The angled handle vectors your push forward and against a fence more easily. I use one in each hand, especially on the jointer. The heavy plastic ought to last for quite a while if you don't run them over with a pickup. The rubber base leaves no marks... |
Customer Rating: |
|
|
|||
| 6. |
|
Big Horn 10225 3-Piece Featherboard Set - Buy 3-Piece Set , Save over 25% from Big Horn Price: $14.99 Customer Review: If you don't have any of these, buy this set, and buy it now. Don't risk your fingers or health. I use the push block on the tablesaw and jointer. The featherboard I use on the tablesaw, bandsaw and router table. The pushstick is used on the tablesaw and the router table. These tools will get used... |
Customer Rating: |
|
|
|||
| 7. |
|
Woodstock International W1104 Yellow Board Buddies from Woodstock International Price: $29.99 Customer Review:  I recently bought the board buddies and will return them. They do not pull the board into the fence as described by other people without tremendous down pressure being applied, resulting in having to stand directly behind the board to push it through, which we all know is dangerous. The anti reverse... |
Customer Rating: |
|
|
|||
| 8. |
|
Woodstock International W1108 Optional 24" Tracks from Woodstock International Price: $16.99 Customer Review: If you have Board buddies this is a great accessory. The track allows you to move the Buddies without remounting them on different areas of your fence. It saves alot of time. I attached a 1" x 3" x 3' piece of pine on the side of my fence and then mounted the track on top of that. I didn't really... |
Customer Rating: |
|
|
|||
| 9. |
|
Hickory Woodworking HW1061 4-Piece Shop Safety Set from Hickory Price: $19.99 |
|
|
|
|||
| 10. |
|
Vega FSXXX Pro Finger Saver from Vega Price: $44.99 |
|
|
|
|||
| 11. |
|
Stots 21150S Push Stick from Stots Price: $16.99 Customer Review: This is the only push stick I've found that let's me feel like I'm using only my hand to guide the board. All other sticks I've tried wobble around and are more trouble than they are worth. This fits comfortably in my hand and allows me to apply a great deal of downward pressure without stressing my... |
Customer Rating: |
|
|
|||
| 12. |
|
Big Horn 10215 Deluxe Featherboard from Big Horn Price: $9.99 Customer Review:  I bought this featherboard to use on my router table. Unfortunately, tightening the hold down clamps has the tendency of forcing the body of the featherboard up out of the mitre groove on my table. As long as you don't tighten too much you're OK. Otherwise, a little pressure and ... POP! Out it... |
Customer Rating: |
|
|
|||
| 13. |
|
Woodstock International W1105 Green Wheels for Shapers from Woodstock International Price: $29.99 Customer Review: I just installed a pair of these on my shaper. The only problem I had was that I thought the Board Buddies tracks were sold in pairs. They are not. Since my shaper is small I cut the track in half and mounted both halves on either side of the spindle. I tested the wheels out and they seem to hold... |
Customer Rating: |
|
|
|||
| 14. |
|
Woodstock International W1106 Orange Wheels for Radial Arm Saws (Pair) from Woodstock International Price: $29.99 |
|
|
|
|||
| 15. |
|
Woodstock International W1107 Optional 12"Tracks from Woodstock International Price: $11.99 |
|
|
|
|||
| 16. |
|
Mesa Vista Design GT2000 42" Magnetic Featherboard System, Includes How-to-Video from Mesa Vista Design Price: $149.99 Customer Review: It isn't often I write to brag on a product, but I have the GT 2000 43" System I use on my table saw. I also have two Spare GT 2000 Which I use on by band saw and they really work great! I've tried a number of products, including some homemade ones, but the Grip-Tite is the best I've used. Using the... |
Customer Rating: |
|
|
|||
| 17. |
|
Vega FSUXXX Utility Finger Saver from Vega Price: $44.99 |
|
|
|
|||
| 18. |
|
Delta 37-108 Push Blocks for Jointers from Delta Price: $17.60 |
|
|
|
|
1 - 18 |
| PortionsAmazon.com, Inc. |