|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
Porter-Cable 4112P 12" Dovetail Machine from Porter-Cable Price: $109.99 Customer Review:  The other review is right. I bought this product specifically to do box joints and finally gave up after three hours. It is fairly easy to set up and nicely made. I have not tried the dovetail joint template yet, so maybe it is better. But please, someone at Porter Cable re-write those directions.... |
Customer Rating: |
|
|
|||
| 2. |
|
Porter-Cable 7216 24" Omnijig from Porter Cable Price: $399.99 |
|
|
|
|||
| 3. |
|
Keller Dovetail System 135-1500 Journeyman DoveTail Jig from Keller Dovetail System Price: $129.99 Customer Review:  This is a great jig. The backing block thickness dimension needs an adjustment in order to make hardwood joints that aren't too tight, however - read other reviews. The 3 1/2" depth isn't critical; neither is the 18" length. I suggest milling the block out of poplar, soft maple, or (like I did)... |
Customer Rating: |
|
|
|||
| 4. |
|
Porter-Cable 5116 Omnijig 16" Dovetail Machine from Porter-Cable Price: $299.99 Customer Review: I watched the video, went to my shop, set up my Dovertail machine and the only setting i had to change that the video suggested was the depth of the dovetail bit. The precision was incredible, and best yet repeatable! I love this machine, my wife just got me the variable spaced template (more on... |
Customer Rating: |
|
|
|||
| 5. |
|
JET 709060 12" Dovetail Jig from JET Price: $59.99 Customer Review:  The set up of this jig is totally trial and error and the instruction booklet is loaded with errors. I couldn't believe you actually have to remove some parts to get at adjustments. The set up guide instructs you to do the first trial cut at a bit depth of 7/8". This is extremely dangerous because... |
Customer Rating: |
|
|
|||
| 6. |
|
Keller Dovetail System 135-2200 Journeyman DoveTail Jig from Keller Dovetail System Price: $199.99 Customer Review:  "handles wood 1/8- to 3/4-inch thick". To do this you need to purchase additional router bits. |
Customer Rating: |
|
|
|||
| 7. |
|
Porter-Cable 4115P 1/2" Box Joint Template from Porter-Cable Price: $36.99 Customer Review: Follow the manual, to a point. The box joints are cut with the board mounted in the front clamp but you have to mount a board under the back clamp. The manual says that this board should be at least 1/4" thicker than the board you are cutting box joints on. I didn't get why it had to be 1/4" thicker... |
Customer Rating: |
|
|
|||
| 8. |
|
Woodstock International H0983 Dovetail Jig With Aluminum Template from Woodstock International |
|
|
|
|||
| 9. |
|
Porter-Cable 7122 Adjustable through Dovetail Template from Porter-Cable Price: $159.99 Customer Review: I FINALLY BROKE DOWN AND BOUGHT THE PORTER CABLE ADJUSTABLE DOVE TAIL TEMPLATE FOR MY OMNI JIGS IN THE SHOP. I HAD BEEN USING MY LEIGH JIG WHEN I NEEDED TO HAVE THE ABILITY TO ADJUST THE LOCATION OF THE DOVE TAILS. WELL TO SAY THE LEAST IT WAS EASIER TO SET UP THAN THE LEIGH JIG IS. AS FOR THE... |
Customer Rating: |
|
|
|||
| 10. |
|
Porter-Cable 5121 Tapered Sliding Dovetail Template from Porter-Cable Price: $49.99 |
|
|
|
|||
| 11. |
|
Porter-Cable 5122 Adjustable Through Dovetail Template from Porter-Cable Price: $124.99 |
|
|
|
|||
| 12. |
|
Woodstock International H2616 7/16" Dovetail Template for H0983 Dovetail Jig from Woodstock International |
|
|
|
|||
| 13. |
|
Woodstock International G3692 Dovetail Template - 9/16" from Woodstock International |
|
|
|
|||
| 14. |
|
Woodstock International G3928 1/2" Template from Woodstock International |
|
|
|
|||
| 15. |
|
Woodstock International G3691 Dovetail Template - 7/16" from Woodstock International |
|
|
|
|||
| 16. |
|
Woodstock International W1098 9/16" Dovetail Template from Woodstock International Price: $14.99 |
|
|
|
|||
| 17. |
|
Woodhaven 7500K Starter Kit from Woodhaven |
|
|
|
|||
| 18. |
|
Porter-Cable 7121 Tapered Sliding Dovetail Template from Porter-Cable Price: $62.99 Customer Review: OK, it works and works well, other than the sloppy stops the Omnijig employees. But this price for a piece of machined aluminum? What does it cost Porter Cable to make this accessory? $2? PC does have to cover the development costs and should charge a premium for a jig that is somewhat of a... |
Customer Rating: |
|
|
|||
| 19. |
|
Porter-Cable 7120 1/4" Half-Blind Dovetail Template from Porter-Cable Price: $66.99 |
|
|
|
|||
| 20. |
|
Porter-Cable 7123P 1/2" Box Joint Template from Porter-Cable Price: $69.99 |
|
|
|
|||
| 21. |
|
Porter-Cable 5123 1/2" Box Joint Template from Porter-Cable Price: $59.99 Customer Review:  I recently purchased the box joint template specifically for a display cabinet I am currently working on. When I first attempted to use this template, I was incredibly frustrated with how tempermental the set up was. After multiple attempts and changes in set up, my joints were tight and lined up... |
Customer Rating: |
|
|
|||
| 22. |
|
Porter-Cable 7119 1/2" Hand Dovetail Template (Tails) from Porter-Cable Price: $47.99 |
|
|
|
|||
| 23. |
|
Porter-Cable 7118P 1/2" Hand Dovetail Template (Pins) from Porter-Cable Price: $46.99 |
|
|
|
|||
| 24. |
|
Yukon Tool YTDTM 12" Dovetail Machine from Yukon Tool Price: $69.99 |
|
|
|
|||
| 25. |
|
Porter-Cable 4114P 1/4" Half Blind Dovetail Template from Porter-Cable Price: $42.99 Customer Review: OK, it works and works well, other than the sloppy stops the Omnijig employees. But this price for a 14" piece of machined aluminum? What does it cost Porter Cable to make this accessory? $2? PC does have to cover the development costs and should charge a premium for a jig that is somewhat of a... |
Customer Rating: |
|
|
|
1 - 25 |
|
| PortionsAmazon.com, Inc. |