|
|
|
|
|
|
In association with
|
|
|||
| 1. |
|
Kreg K2000PP ProPack Pocket Hole Jig from Kreg Price: $129.99 Customer Review:  I've used my Kreg kit for several months now. It sure makes a difference in the speed of assembly. I whipped up a router table in no time and a lot of other projects besides. Works great on dimensional lumber too. Used it to make the 2X4 framing for a utility building addition as well as the framing... |
Customer Rating: |
|
|
|||
| 2. |
|
Kreg SPS-F125 1-1/4" #6 Fine Screw (1000-Pack) from Kreg Price: $27.99 Customer Review: I bought these with the Kreg Pro Pack Pocket Hole Kit. They do the job well. Other sizes are available as well. It is a good idea to stock up on this 1 1/4" size, since they are intended for use in the most popular wood size of 3/4". That way you get 1/2" bite into the joining wood. These fine... |
Customer Rating: |
|
|
|||
| 3. |
|
Kreg SML-C125 1-1/4" #7 Coarse Screw (1000-Pack) from Kreg Price: $27.99 Customer Review: I had read a review that stated they were using the fine screws for everything. I found that when using soft pine, and more importantly into plywood, the fine screws were on the edge of getting the job done. All you had to do was remove one of the screws and reinsert it, to see what I mean. In my... |
Customer Rating: |
|
|
|||
| 4. |
|
Kreg R2XXX Rocket Pockethole System from Kreg Price: $59.99 Customer Review: I have been using the Kreg Pocket Jig for about eight years and have been totally satisfied. For cabinet construction, I generally use pocket screws in conjunction with biscuits. It may take a little longer, but the end result is perfect alignment and no clamping reqired. |
Customer Rating: |
|
|
|||
| 5. |
|
Porter-Cable 552XXX Production Pocket Cutter from Porter-Cable Price: $699.99 Customer Review: I build cabinets part time and was looking for a better, quicker way to make cabinet face frames when I saw this pocket cutter on a T.V. show. I ordered it and was very surprised at what the pocket cutter consisted of: a rigid metal box, a heavy duty clamp and two porter cable router motors to be... |
Customer Rating: |
|
|
|||
| 6. |
|
Kreg M-2XXX K2 35mm Jig Pockethole Professional from Kreg Price: $109.99 Customer Review: I bought this tool for a fairly complicated job at the house. I needed to replace all the oak spindles on our staircase. After I cut them to size I used the pocket hole jig to screw the spindles into the stairs. It worked with unexpected ease. The finished railing is solid and looks great. I went... |
Customer Rating: |
|
|
|||
| 7. |
|
Kreg SKO2 Pocket Hole Screw Kit from Kreg Price: $24.99 |
|
|
|
|||
| 8. |
|
Kreg K2000 Pro Pack from Highland Hardware Customer Review: I am surprised that this has not gotten more reviews. I use the jig a lot and have great sucess. It is accurate, strong, adapatable, and well designed. The screws hold well and I have not had any splitting. The vice grip type tool that hold the faces flat is somewhat a pain to first set up but works... |
Customer Rating: |
|
|
|||
| 9. |
|
Kreg DB50 Foreman Pocket Machine from Kreg Price: $749.99 |
|
|
|
|||
| 10. |
|
Milescraft 1299 SignCrafter from Milescraft Inc. Price: $39.99 |
|
|
|
|||
| 11. |
|
Kreg P-OAK Oak Plugs for Pockets (50-Pack) from Kreg Price: $6.99 |
|
|
|
|||
| 12. |
|
Kreg H1159 Rocket Jig Kit from Kreg Customer Review: Everything from fine joinery to toe-nailing rough framing.A must have for any kind of carpenter/woodworker.Definitely worth the price. |
Customer Rating: |
|
|
|||
| 13. |
|
Kreg P-MAP Maple Plugs for Pockets (50-Pack) from Kreg Price: $6.99 |
|
|
|
|||
| 14. |
|
Kreg H3605 Mini Jig from Kreg Customer Review: When you think about it, this mini gives you the complete pocket hole capabilities with the least amount of money. (You'll need to buy the special drill bit as well for ideal results, both in starting the screw, and depth adjustability requirements) Since two holes are required for greater strength,... |
Customer Rating: |
|
|
|||
| 15. |
|
Simp'l Products PJ-5K Pock't Jig Kit from Simp'l Products Price: $29.99 |
|
|
|
|||
| 16. |
|
Kreg C-WHT White Plastic Caps (50-Pack) from Kreg Price: $6.99 |
|
|
|
|||
| 17. |
|
Kreg H1160 Rocket Jig from Kreg Customer Review:  I have heard in the past that Amazon will sometimes post a photo of the product, but when that item is received, it does not match the photo. I am a little curious about the price of $29.95 including the drill bit and the clamp. I am skeptical. |
Customer Rating: |
|
|
|||
| 18. |
|
Porter-Cable 5507 9/64" Pilot Hole Bit for 552 Production Pocket Cutter from Porter-Cable Price: $12.40 |
|
|
|
|||
| 19. |
|
Kreg P-PIN Pine Plugs for Pockets (50-Pack) from Kreg Price: $6.99 |
|
|
|
|||
| 20. |
|
Kreg Rocket Jig Kit from Highland Hardware |
|
|
|
|||
| 21. |
|
STEELX Pocket Hole Guide-Face Frame Jig - D1060 from Woodstock Customer Review:  These are sold under a number of brand names, but they look like they are identical. They are junk. I bought one from Grizzly. The drill bit bound and then cut into soft metal of the guides. Each time I drilled a pocket hole, more of the metal was removed. The result was shallower and shallower (and... |
Customer Rating: |
|
|
|||
| 22. |
|
Kreg G3825 Jig Kit with Drill Bit & Collar from Kreg |
|
|
|
|||
| 23. |
|
Grizzly H2390 Pock'It Jig from Grizzly |
|
|
|
|||
| 24. |
|
Woodstock International G3243 Face Frame Jig from Woodstock International Customer Review: These are sold under a number of brand names, but they look like they are identical. They are junk. I bought one from Grizzly. The drill bit bound and then cut into soft metal of the guides. Each time I drilled a pocket hole, more of the metal was removed. The result was shallower and shallower (and... |
Customer Rating: |
|
|
|||
| 25. |
|
Kreg K2 Jig from Highland Hardware |
|
|
|
|
1 - 25 |
|
| PortionsAmazon.com, Inc. |